The Cartoni UV-C BOXER is a large sliding boxlike container for safe loading and sanitization of multiple pieces of gear at the same time. The Cartoni UV-C BOXER is the only medical-grade UV-C device designed for many objects including Digital, Film and Broadcast equipment. The UV-C medical-grade lamps are tested to provide ten times the irradiation needed to sanitize the surface of objects in the device and the reflective walls provide an even distribution of the radiation on the entire surface of the item to be disinfected. The power of a reflected beam is 40% of the original beam, exceeding the needed germicidal effect by five times. Each lamp has a life of 6,000 hours and has no ozone release.

The typical length of time needed to disinfect and sanitize a set of equipment, including a camera, two lenses, two batteries, microphone, etc. is just three minutes. In order for effective sanitization, the objects must be well arranged and spaced in the BOXER chamber to ensure no overlapping.

The UV-C BOXER was tested by an FDA compliant laboratory with 64 plates of antibiotic-resistant bacteria and other microorganisms, including COVID-19. Each was placed on different materials such as glass, composite, and metal to simulate broadcast and film equipment. Additionally, each microorganism was tested at five different positions within the UV-C BOXER’s chamber to ensure that the UV-C BOXER could effectively neutralize them. In it’s independent lab tests, the Cartoni UV-C BOXER was found to disinfect 99.985% of microorganisms, including COVID-19, in three minutes. . The test results make the BOXER the first device specially designed for the film industry to be proven to disinfect.

Cartoni designed the BOXER with a safety lock system to avoid accidental UV-C irradiation.  If the door to the BOXER chamber is not safely locked, the UV-C lamps will not activate.

The UV-C BOXER is safe if properly used, effective, and fast. Operational indoors and outdoors, it’s ideal for carrying to locations. Equipped with wheels with positive locks, it can easily be moved around on flat surfaces or studios. It’s box design, and large chamber allows productions, props and rental houses to evenly sanitize multiple objects at a time, which may unknowingly contaminate on sets.

The CARTONI’s UV-C Boxer is equipped with ten medical-grade UV-C (100-280nm) lamps, neutralizes microorganisms, including COVID-19, in just three minutes. The test results make the BOXER the first device specially designed for the film industry to be proven to disinfect.

Lightweight 75mm PTZ Tripod, mid level spreader, rubber feet & 75mm half bowl AT922

This essential solution pairs a lightweight Cartoni 75mm tripod equipped with a half-ball camera attachment to easily attach to PTZ cameras. The entire set-up rests on an optional lightweight dolly, allowing studios to transport and move the set-up quickly and easily to create multiple studio configurations. This set-up includes a mid-level spreader and hooking feet.

For TZ001 Stand, T721 PTZ tripod, SDS Tripod, Red Lock tripod

P20 Pedestal with PTZ 1/2 ball adapter and pump

Cartoni’s new P20 pedestal with 100mm 1/2 Bowl gives PTZ cameras outstanding support. It allows camera operators to use PTZ cameras in super high set-ups, a vertical gliding movement of 40 cm stroke, and super-precise traveling ability on even floors.Equipped with a flat 3/8, ¼” camera attachment, the P20/ PTZ pedestal enables the PTZ camera to be assisted by a teleprompter, making it ideal in newsrooms.

P20 Pneumatic system w/extendable dolly 100mm wheels + hand pump + AH870 attachment

Cartoni’s new P20 pedestal with PTZ attachment gives PTZ cameras outstanding support. It allows camera operators to use PTZ cameras in super high set-ups, a vertical gliding movement of 40 cm stroke, and super-precise traveling ability on even floors.Equipped with a flat 3/8, ¼” camera attachment, the P20/ PTZ pedestal enables the PTZ camera to be assisted by a teleprompter, making it ideal in newsrooms.

Lightweight 100mm PTZ Tripod, mid level spreader, rubber feet AT877 and 100mm half bowl AT923

This essential solution pairs a lightweight Cartoni 100mm tripod equipped with a Knurled baby pin ensures whatever is being mounted stays put. The entire set-up rests on an optional lightweight dolly, allowing studios to transport and move the set-up quickly and easily to create multiple studio configurations. This set-up includes a mid-level spreader and hooking feet.

3 Stage PTZ TZ001 stand + ball level AT926 + rubber feet

Cartoni’s new PTZ stand is extremely lightweight and versatile. It features a telescopic three-stage stand complete with a PTZ ball joint, allowing easy mounting of a PTZ camera. This lightweight PTZ stand is also equipped with a quick-release sliding plate that allows users to attach and center a PTZ camera quickly. The stand also comes with rubber feet, which can be used alone or can be installed on Cartoni’s lightweight dolly.

3 Stage PTZ TZ001 stand and rubber feet

Cartoni’s new PTZ stand is extremely lightweight and versatile. It features a telescopic three-stage stand complete with a PTZ ball joint, allowing easy mounting of a PTZ camera. This lightweight PTZ stand is also equipped with a quick-release sliding plate that allows users to attach and center a PTZ camera quickly. The stand also comes with rubber feet, which can be used alone or can be installed on Cartoni’s lightweight dolly.