Lambda Nodal Heads

Lambda 10 with Pan Bar and Counterweights for Telescopic Handle, 100mm BB (supports up to 22 lbs.)

As the entry-level member of the CARTONI Nodal Heads the LAMBDA 10 replicates all the features of the classic LAMBDA for a perfect Camera setting at any angle.

Two patented Fluid 3 steps modules smoothly assist all Pan and Tilt movements. The LAMBDA 10 can be mounted on any 100mm bowl Tripod or base and is ideal for underslung use on Jib arms, Cranes, as well as for table top work or medical documentaries. The LAMBDA 10 matches perfectly with the CARTONI JibO.

Lambda 25 3rd Axis with hand wheel and counterweight

A third axis for Lambda 25

Allows nodal setting in 3 axis of rotation as if included in a sphere, can be mounted on existing Lambda 25 by simply disassembling the 2 L shaped frames and inserting the Dutch axis in between.

Ideal for underslung use on dollies or cranes.

Two counterweights of 1 kg each complete the package.

Lambda Head 50 with 1 Pan Bar and Short Handle (supports up to 110 lbs.)

The Award winning LAMBDA Nodal Head is the only Support that allows to set the nodal position with any Camera and pivoting 360° on the focal plan of any Camera.

The settings are achieved by graduated slides both horizontally and ver cally with micrometric cranks for extreme precision. A smart system of orientable counterweight rods can be used when the slide run is not su cient.

The LAMBDA 50 Head can be mounted on any classic support as Tripods or Dollies or used in underslung position from Cranes and Jib arms.

Optional accessories as 3rd Axis, the orientable pan bar, steering wheel, eyepiece holder and the counterweight rods complete the most versatile of supports.

Lambda 50 Third Axis

The Lambda 50 Fluid Head employs the patented CARTONI fluid drag control system on both pan and tilt modes. In order to obtain the 3rd Axis rotation, the Lambda features the 3rd accessory comprising an additional fluid drag system with 7 steps + "0".

K102 JibO SDS includes a fluid module base

The new portable 3 section CARTONI JIBO is designed to be one of the most versatile and cost effective lightweight Jibs, carrying up to 20 kg (44 lbs) and fits into a practical lightweight case on wheels.

The JIBO‘s innovative unique feature of the 3 easy mounting sections provides fast and easy operational flexibility and can be assembled or disassembled in less than 3 minutes. JIBO adds the benefit of diagonal tracking and elevation to the traditional pan and tilt movement of a standard Fluid Head. This new lightweight Jib weighs only 15 Kg (33 lbs) and folds down to 1.20 meter (47") in length and allows shooting from absolute ground level to 2 meters (78") in height, with a maximum extension of 172cm( 67”9.

The rear part of the arm, which holds the counterweights, is extendible to provide for accurate camera balance; the typical counterweight kit is 25 kg of rubberized gym weights. The front telescopic arm permits the CARTONI JIBO to work in a wide variety of shooting positions or requirements, The fluid head supporting the camera can be positioned in several different positions as under-slung, side-ways, etc. The T-bar accessory is available for remote control set up and allows to install controls for camera and zoom. JIBO interfaces with any 100mm bowl base tripod and for heavier set-ups a Mitchell base adapter is available. Another unique feature is the horizontal lock for safer set-up operation. The JIBO’s standard configuration includes, a 100mm bowl base head attachment with multiple orientation, left to right and on/under and 2 spirit levels.

Lambda Total Dutch with camera plate, hand wheel and weight (will work as 3rd Axis on Lambda 25)

A patented new revolutionary tool to add a 3^rd axis lateral rotation to any classic heavy duty pan and tilt head

Allows unprecedented 360 ° rotation for extraordinary creative shots.

The rotation is driven by a steering wheel pierced in the center for cable channel.

Two 1 kg counterweights complete the set for true nodal rotation around the optical center.

The Total Dutch head is available as a product ready to be installed on top of any head via two 3/8 “ screws, or can be composed with Lambda 25 Dutch axis plus the camera stage of the Lambda 25 head.

After setting the standard with its famed DUTCH Head in 2000, CARTONI has expanded the canted angle capability, creating the ultimate in DUTCH angle compositions.

C20S Dutch Head with one pan bar.  For cameras weighing up to 61 lbs.

This special accessory has been conceived to add a 3rd axis to a standard Fluid Head and allow the lateral movement called "Dutch angle", enhancing special effects.

The CARTONI C20S Dutch Head is designed to make exceptionally smooth side-tilt effects simple and straightforward to execute.

The Dutch Heads integrate the award winning CARTONI fluid module in progression from "0" to 7 intensity.
The counterbalance system features the 7 step spring mechanism.

The CARTONI Dutch Head interfaces directly with the quick release plate on the top of any camera support head with European style quick release plate of can be fixed by 2 3/8" screws.

A special telescopic orientable pan bar completes the equipment.