2 Stage Aluminum Flat Base

Constructed from either die cast alloy or carbon fiber, the Studio tripod is designed to provide extremely stable support for studio EFP configurations or 35mm film cameras.
Fitted with two rotary clamping mechanisms and features 22mm diameter tubes, the single stage version, performs unsurpassed torsional rigidity and structural integrity, while the locking knobs, which include over tightening protection, ensure maximum clamping efficiency maintained over the tripod lifetime. On the two-stage version, higher rigidity is obtained with a combination of 22/25mm diameter tubes.
Ideal for C40 S, this tripod can be supplied with an interchangeable 150mm-bowl base or Flat Mitchell Base.

T-bar for jibO

The Cartoni T-Bar is an accessory for use with the portable 3-section lightweight Compact Jibo. This accessory enables remote control set up and allows installation of controls for camera and zoom.

Adapter for JibO and all Mitchell flat base Tripods

100mm 1 Stage HD Aluminum

This is the Cartoni H601 Heavy Duty Tripod, made of aluminum and featuring a 100mm bowl-base, single leg stage, 176 lb payload, and quick and secure flip-clamping system with safety locks. The feet feature threaded spikes that support optional adjustable rubber feet as well as dollies and ground spreaders. The H601 also supports a mid-level spreader, but it would require optional pivoting tripod feet when incorporating one.

Mid-Level Smart Spreader

The SDS Smart Deployment Series SMART LOCK mid-level spreader, featuring a patented CARTONI “no-bind” mechanism for quick spread and collapse capability, is a built-in spreader with a unique 2 stage deployment concept.

Made of high performance composite, the SMART LOCK weight only 460 gr (1 lbs).

A side button on each arm releases the 2 seconds, while the same retract by simply pushing them in.

The spreader fits to any CARTONI DV and ENG tripod with a quick release hook.

The practical strap fixed to the center ring of the spreader and to the tripod base speeds the folding of the system by one single move.

100mm SmartStop SDS 2 Stage Carbon Fiber Tripod

This ENG lightweight tripod is specially designed for fast setup. In just 3 moves of the patented Smart-Stop lever you can adjust the double stage legs in a moment and yet rely on a positive clamp at any desired operative height.

Smart-Stop double stage tripod features 100 mm bowl base in aluminium or carbon fiber tubing.

Ideally completed by built-in Spreader and pivoting rubber feet it features an extraordinary torsional rigidity and becomes the bestseller tripod for ENG and Documentary work.

If mounted with Ground Spreader S732:
- Minimum Height - 45 cm (17,7 in.)
- Maximum Height - 155 cm (61,0 in.)
- Folded Height - 71 cm (28,0 in.)

SDS Aluminum Tripod

This ENG lightweight tripod is specially designed for fast setup. In just 3 moves of the patented Smart-Stop lever you can adjust the double stage legs in a moment and yet rely on a positive clamp at any desired operative height.

Smart-Stop double stage tripod features 100 mm bowl base in aluminium or carbon fiber tubing.

Ideally completed by built-in Spreader and pivoting rubber feet (not included) it features an extraordinary torsional rigidity and becomes the bestseller tripod for ENG and Documentary work.

If mounted with Ground Spreader S732:
- Minimum Height - 45 cm (17,7 in.)
- Maximum Height - 155 cm (61,0 in.)
- Folded Height - 71 cm (28,0 in.)

K102 JibO SDS includes a fluid module base

The new portable 3 section CARTONI JIBO is designed to be one of the most versatile and cost effective lightweight Jibs, carrying up to 20 kg (44 lbs) and fits into a practical lightweight case on wheels.

The JIBO‘s innovative unique feature of the 3 easy mounting sections provides fast and easy operational flexibility and can be assembled or disassembled in less than 3 minutes. JIBO adds the benefit of diagonal tracking and elevation to the traditional pan and tilt movement of a standard Fluid Head. This new lightweight Jib weighs only 15 Kg (33 lbs) and folds down to 1.20 meter (47") in length and allows shooting from absolute ground level to 2 meters (78") in height, with a maximum extension of 172cm( 67”9.

The rear part of the arm, which holds the counterweights, is extendible to provide for accurate camera balance; the typical counterweight kit is 25 kg of rubberized gym weights. The front telescopic arm permits the CARTONI JIBO to work in a wide variety of shooting positions or requirements, The fluid head supporting the camera can be positioned in several different positions as under-slung, side-ways, etc. The T-bar accessory is available for remote control set up and allows to install controls for camera and zoom. JIBO interfaces with any 100mm bowl base tripod and for heavier set-ups a Mitchell base adapter is available. Another unique feature is the horizontal lock for safer set-up operation. The JIBO’s standard configuration includes, a 100mm bowl base head attachment with multiple orientation, left to right and on/under and 2 spirit levels.

100mm base Jibo arm incl: lightweight shipping case with wheels.(Weights and tripod not included)

The new portable 3 section CARTONI JIBO is designed to be one of the most versatile and cost effective lightweight Jibs, carrying up to 20 kg (44 lbs) and fits into a practical lightweight case on wheels.

The JIBO‘s innovative unique feature of the 3 easy mounting sections provides fast and easy operational flexibility and can be assembled or disassembled in less than 3 minutes.

JIBO adds the benefit of diagonal tracking and elevation to the traditional pan and tilt movement of a standard Fluid Head.

This new lightweight Jib weighs only 15 Kg (33 lbs) and folds down to 1.20 meter (47") in length and allows shooting from absolute ground level to 2 meters (78") in height, with a maximum extension of 172cm( 67”9.

The rear part of the arm, which holds the counterweights, is extendible to provide for accurate camera balance; the typical counterweight kit is 25 kg of rubberized gym weights. The front telescopic arm permits the CARTONI JIBO to work in a wide variety of shooting positions or requirements, The fluid head supporting the camera can be positioned in several different positions as under-slung, side-ways, etc.

The T-bar accessory is available for remote control set up and allows to install controls for camera and zoom.

JIBO interfaces with any 100mm bowl base tripod and for heavier set-ups a Mitchell base adapter is available .

Another unique feature is the horizontal lock for safer set-up operation.

The JIBO’s standard configuration includes, a 100mm bowl base head attachment with multiple orientation, left to right and on/under and 2 spirit levels.

Focus 22 Fluid Head assembled with 1 handle, 2 stages carbon fiber ENG Tripod Smart Stop SDS, Smart Lock mid-level Spreader and rubber feet. This System includes a soft bag.

Smart Deployment Series (SDS)

The SDS system expands on the famous SMART STOP two stage/single lever tripod technology with the addition of new SMART LOCK mid-level spreader, featuring a patented “no-bind” mechanism for quick spread and collapse capability.

Combined, these Smart-features create the most intelligent and fastest deployed tripod in the industry.

The new FOCUS 22 is specifically designed to support the wide variety of new ENG cameras, so compact yet so fully accessorized, featuring the patented CARTONI “wing” continuously adjustable counterbalance.

With its broad range of payloads – 3 kg (6.5 lbs) to 22 kg (48.5 lbs) - The 22 aims to become the ideal partner for all news gathering and outdoor shooting jobs.

Rugged but easy to operate the new Fluid Head has all the ergonomic settings at the right place. Fluid drag in both pan and tilt feature the distinctive renowned CARTONI patented infinitely adjustable labyrinth system.

Positive locks, wide range sliding platform incorporating the European style quick release plate, a switchable illuminated spitit level completes the operating specs.

FOCUS 22, weighs only 3.9 kg (8.6 lbs) thanks to the extensive use of extremely lightweight magnesium alloys.

The 22 interfaces with all 100 mm bowl base tripods.

FOCUS 22 Fluid Head assembled with 1 handle, 2 stages aluminum ENG Tripod Smart Stop SDS, Smart Lock mid-level Spreader and rubber feet. This System includes a soft bag.

Smart Deployment Series (SDS)

The SDS system expands on the famous SMART STOP two stage/single lever tripod technology with the addition of new SMART LOCK mid-level spreader, featuring a patented “no-bind” mechanism for quick spread and collapse capability.

Combined, these Smart-features create the most intelligent and fastest deployed tripod in the industry.

The new FOCUS 22 is specifically designed to support the wide variety of new ENG cameras, so compact yet so fully accessorized, featuring the patented CARTONI “wing” continuously adjustable counterbalance.

With its broad range of payloads – 3 kg (6.5 lbs) to 22 kg (48.5 lbs) - The 22 aims to become the ideal partner for all news gathering and outdoor shooting jobs.

Rugged but easy to operate the new Fluid Head has all the ergonomic settings at the right place. Fluid drag in both pan and tilt feature the distinctive renowned CARTONI patented infinitely adjustable labyrinth system.

Positive locks, wide range sliding platform incorporating the European style quick release plate, a switchable illuminated spitit level completes the operating specs.

FOCUS 22, weighs only 3.9 kg (8.6 lbs) thanks to the extensive use of extremely lightweight magnesium alloys.

The 22 interfaces with all 100 mm bowl base tripods.